Analisis Kerusakan Injection Fuel Pump pada Sistem Bahan Bakar Mesin Induk MT. Vienna Gabrielle

Authors

  • Moh. Syahrul Hanif Universitas Hang Tuah
  • Maxima Ari Saktiono Universitas Hang Tuah
  • Daryanto Daryanto Universitas Hang Tuah

DOI:

https://doi.org/10.65428/portman.v2i2.165

Keywords:

Dirty Fuel, Fuel System, Injection Pump, Main Engine, Pump Maintenance

Abstract

The purpose of this study was to determine the causes of injection fuel pump damage and the efforts taken to overcome it. The research method used was descriptive qualitative, with data collection techniques including field observation, interviews, and documentation study during sea practice on board. The collected data were analyzed to identify the main factors causing the damage.The results showed that the damage to the injection fuel pump was caused by dirty fuel oil (FO). Impurities carried by the fuel entered the pump components, causing wear and disturbing the pump’s performance. This condition resulted in abnormal fuel pressure and affected the combustion process in the main engine. This study focused only on injection fuel pump damage without involving the injector, because the injector was not damaged. The corrective actions taken included cleaning the fuel lines, inspecting the condition of injection fuel pump components, replacing worn parts, cleaning the daily tank and discontinuing its use, as well as increasing supervision of fuel cleanliness. With proper maintenance and fuel quality control, damage to the injection fuel pump can be minimized so that the main engine performance can return to normal.

References

Anugrah, R. A. (2021). Analisis pengaruh kalibrasi pompa injeksi tipe inline dan injektor motor diesel terhadap volume dan tekanan penginjeksian. Jurnal Teknik Mesin (Journal of Mechanical Engineering), 10(1). https://doi.org/10.22441/jtm.v10i1.10192

Bayu, I., Rifdarmon, R., Nasir, M., Hidayat, N., & Syaifullah, L. (2024). Analisis modifikasi pemasangan fuel filter terhadap fuel rail pressure common rail pada Chevrolet Captiva. JTPVI: Jurnal Teknologi dan Pendidikan Vokasi Indonesia, 2(2), 157–164. https://doi.org/10.24036/jtpvi.v2i2.164

Dewanto, J., Sutrisno, T., & Wardana, N. G. W. (2023). Kajian eksperimen pengaruh diameter plunger pompa injeksi bahan bakar pada performa dan gas buang mesin Daihatsu Taft Diesel DL62. Otopro, 18(2), 49–53. https://doi.org/10.26740/otopro.v18n2.p49-53

Efendi, H., Putra, A. P., & Sartika, D. (2021). Kalibrasi pompa injeksi tipe in-line dalam persamaan volume bahan bakar motor diesel 4 silinder. V-MAC, 6(1), 15–21. https://doi.org/10.36526/v-mac.v6i1.1150

Lende, F., Limbong, I., & Bunganaen, W. (2025). Analisis kualitas bahan bakar marine fuel oil (MFO) hasil separasi pada pembangkit listrik tenaga diesel PT. Cogindo Daya Bersama Kupang NTT. LONTAR Jurnal Teknik Mesin Undana, 12(2), 11–14.

Manuputty, R. P., Nalle, C. Y. A., Filemon, & Sumarta, R. P. (2025). Analisis penurunan kinerja booster pump pada sistem bahan bakar kapal. Jurnal Patria Bahari, 5(1), 36–41.

Marsudi, S. (2025). The impact of fuel quality on the performance and maintenance of the ship's main engine. Jurnal Aplikasi Pelayaran dan Kepelabuhanan, 16(1). https://doi.org/10.30649/japk.v16i1.185

Putra, O. M. D., Wicaksono, R. B., Hidayat, B., & David, M. (2024). Pengaruh kualitas bahan bakar terhadap auxiliary steam boiler di kapal MT. SC Champion XLV. Jurnal Maritim Malahayati, 5(2), 210–217. https://doi.org/10.70799/jumma.v5i2.97

Sadili, N. M., & Dalimunthe, R. (2025). Pengaruh kalibrasi tekanan injector terhadap torsi, daya, dan konsumsi bahan bakar mesin diesel Mitsubishi L300: Pengaruh kalibrasi tekanan injector terhadap torsi, daya, dan konsumsi bahan bakar mesin diesel Mitsubishi L300. Jurnal Unitek, 18(2), 372–379. https://doi.org/10.52072/unitek.v18i2.1526

Saklil, M. A., Noval, R., & Yusyama, A. Y. (2025). Analisis penyebab low fuel pressure pada engine C27 di unit track dozer D10T. Prosiding Seminar Nasional Teknik Mesin, 15(1), 779–785.

Sebayang, F. Y. (2022). Analisis penyebab kerja injector mesin induk yang tidak optimal di MT Dewayani [Doctoral dissertation, Politeknik Ilmu Pelayaran Semarang].

Sumarlin, S., Saragih, T. W. A., & Hasballah, T. (2024). Pengaruh kalibrasi pompa injeksi sebaris pada mesin diesel berkapasitas 2500 CC terhadap emisi gas buang dan konsumsi bahan bakar. Jurnal Teknologi Mesin, 5(2), 1–6.

Tulloh, S. H., & Purwoko. (2024). Pengaruh penggunaan filter pada strainer terhadap usia pakai filter bahan bakar mesin diesel 6374 CC. Jurnal Teknik Mesin, Industri, Elektro dan Informatika, 3(2), 146–158. https://doi.org/10.55606/jtmei.v3i2.3793

Winoko, Y. A., & Junaidi, M. K. Z. N. (2023). Analisis pengaruh perubahan sudut penginjeksian bahan bakar terhadap kinerja mesin diesel untuk genset. Briliant, 8(2), 490–495. https://doi.org/10.28926/briliant.v8i2.1217

Zai, M. M. (2025). Kajian sistem pengabutan bahan bakar mesin diesel kapal. Indonesian Journal of Marine Engineering.

Downloads

Published

2026-07-30